Orion 2000 Bedienungsanleitung PDF herunterladen (Seite 57)

User’ Guide 57

6. Mode of Operation

Bridge mode

Bridge mode is the factory default setting.

NAT mode

¾ ip nat enable

Enable NAT will also enable DHCP server on NAT-private subnet automatically.

Example:

 NAT-Private subnet 192.168.100.0/24 (default is 192.168.100.0/27)

• (253) Dynamic Private IPs 192.168.100.2~192.168.100.254

• Gateway IP address 192.168.100.1

• Dynamic public WAN IP address from Head-end DHCP server

Telnet commands:

CM>interface ethernet address 192.168.100.1 mask 255.255.255.0 nat-private

CM>ip nat enable

CM>reset

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 79 80

Keine Kommentare

Orion 2000 Bedienungsanleitung Seite 57