INSTRUCTION MANUALIN 296 Rev. B 02/09Providing Exceptional Consumer Optical Products Since 1975Customer Support (800)-676-1343E-mail: support@telescop
101. From the alignment screen, select “1-Star Align” using the scroll buttons. Press ENTER to confirm your choice. 2. The hand controller will pr
11matically be chosen by the hand controller for your viewing pleasure. Use the scroll buttons to view the different deep-sky objects that are availab
12Setup Menu. Set Tracking: -Sidereal Rate: Activates tracking at sidereal rate. This is the default tracking rate. -Lunar Rate: Activates tracki
13Auto GuidingFor astronomical imaging, the SkyView Pro GoTo motor con-trol box has a designated autoguider jack. The pin-outs on the 6 pin modular ja
14SkyView Pro GoTo Hand Controller Menu Tree
153. Technical SpecificationsMotor drives: Dual-axis, GoTo comput- erized. Operation: Northern or Southern hemisphereAutoguidin
16Incorrect star alignment, loose R.A. or Dec. lock-knobs, or “cone” error. If the GoTo hand contoller puts the star outside the eyepiece field of vie
17Note: This calibration method can be applied to both refract-ing and reflecting telescope designs. Differences in the optical path of telescopes do
18Appendix B: Periodic Error Correction (PEC) (Requires an illuminated reticle eyepiece capable of producing at least 300X magnification when used wit
19The SkyView Pro GoTo system will emit a “beep” sound and display “Record completed” when the training time is up. Press any button to exit from the
2Figure 1. The SkyView Pro GoTo System (not all parts on parts list are shown)Motor control box bracketR.A. GoTo motor coverDec. GoTo motor coverDec.
20Orion Telescopes & Binoculars89 Hangar Way, Watsonville, CA 95076Customer Support Help Line (800)‑676‑1343 • Day or EveningOne-Year Limited Warr
3 1. Parts ListQty. Description1 Declination (Dec.) GoTo motor assembly1 Right ascension (R.A.) GoTo motor assembly2 Brass gears w/ 2mm socke
42. Remove the R.A. slow-motion control knob from the R.A. worm gear shaft. The slow-motion knob will not be usable once the SkyView Pro GoTo system
5Attaching the Dec. GoTo Motor Before attaching the Dec. GoTo motor drive, the telescope tube must be removed from the equatorial mount.1. Remove th
64. Make certain that the teeth of the smaller gear of the Dec. GoTo motor assembly meshes with the brass gear. Also, make certain the gears are not
73. The GoTo Hand Controller Once aligned, the GoTo hand controller and dual-axis GoTo motors allow you to automatically point your SkyView Pro mounte
8are used for data entry and as quick reference keys. TOUR button: Takes you on a preset tour of the best night sky objects visible RATE button: Chang
99. Enter your current local time using the 24 hour clock format (example: 2:00PM = 14:00). Press ENTER to view the time you entered. If the time is
Kommentare zu diesen Handbüchern